The Poop Scoop Plumbing facts, helpful tips, DIY, and more!


A New Kitchen Sink?

Should I change my kitchen sink?

TIP: Before purchasing a new kitchen sink, take the time to ensure you have the space available to reconnect the drain correctly.  Many of my customers purchase deeper kitchen sinks and then realize that the placement of their existing drain will not allow for the proper drain installation.  To many times I have seen "do it yourself" drains installed incorrectly which can and usually does lead to drainage problems to include complete line blockages.

Benefits of Stainless Steel Sinks

The versatility of steels today, a stainless steel type of sink might perhaps be the best option when it comes to designing or remodeling a kitchen. Here are the benefits of having stainless kitchen sinks:

  • Stainless steel is relatively lightweight as compared to other materials. They are available in varying sizes and thicknesses, so their weights vary accordingly. The weight of stainless steel sinks is usually dependent on the gauge of the steel. The higher the gauge number, the thinner the steel. Homeowners commonly choose gauge numbers 18 and 20. Thinner stainless steel thinks (gauge 20 or higher) usually dent and scratch easily, so it might not be highly recommended.
  • Stainless steel sinks are relatively easy to clean and they tend to stay looking new for a longer period of time as long as they are cared for properly. You would not have to worry about leaving orange juice stains overnight, as it can easily be cleaned the following day. Stains can cause dulling and scratching however, so it is still best to wipe debris and spills as soon as possible. Putting rubber or plastic mats in the sink can protect it from scratches and protect its shiny surface.
  • There are lots of durable and beautiful stainless steel sinks that do not have rims or seams. The absence of seams gives a very modern and sleek appearance. These are usually made from one single solid steel sheet. Seamless sinks are easiest to clean and to keep clean. There are no crevices or cracks where bacteria, germs and grime can hide in.
  • Stainless steel sinks come in various styles so that you can easily find one that will suit your kitchen theme and style. They are also available in various colors, sizes, and finishes so that it is compatible with any kind of cabinetry or furniture.
  • Stainless steel sinks come in single, two-bowl and three-bowl models, each with varying depths. Depending on how much kitchen work and washing you do, there are a wide variety to choose from. For instance, if you wash lots of pans daily, you can choose a deep, two bowl sink to make sure that there is room for soaking, and for multi-tasking. You can specifically choose one that will best suit your kitchen needs.
  • The best advantage of stainless steel sinks is that they are relatively cheaper than other materials, such as granite. Prices of kitchen sinks vary depending on various factors such as sink size, finish, manufacturer's brand or image, and features it may boast about. There are a wide variety of choices so that you can definitely find one that will best choose your budget without compromising quality.

The main reason why stainless steel sinks are famous is that homeowners can easily find one that will suit their individual needs and style. So, if you are looking into buying one for yourself, make sure you know exactly what you want and choose one that best qualifies.

Which kitchen sink should I buy?

Due to frequency of use and its prominent placement in the home, a kitchen sink should be durable, functional, and attractive. Here's how to buy a kitchen sink that will suit your lifestyle and complement your home's décor.

Read more: How to Buy a Kitchen Sink |

How Deep Should a Kitchen Sink Be?

The depth of a kitchen sink is ultimately based upon your personal preference. Generally, according to Faucet, the standard depth of a double basin sink is about 8 inches. If you use and wash large pots in your sink frequently, you should opt for a sink with a depth of about 9 to 10 inches. If you prefer a smaller bar sink, you can use a sink with a depth of 5.5 to 6 inches.

Read more: How Deep Should a Kitchen Sink Be? |

How to Replace a Kitchen Sink

Tips to keep in mind: Stainless steel sinks can still be a good choice as long as you select one made of heavy gauge steel. Heavy steel (18 Guage) is quiet, durable and easy to maintain.

Read more:


Electric Water Heater Heating Element Troubleshooting and Replacement

Unlike gas water heaters that have gas burners to heat the water, electric water heaters rely upon an upper and lower pair of metal heating elements. These heating elements are made of metal and get hot from electrical resistance, similar to what you would find in an electric cooking range.

As a result of a cold water supply coming in near the bottom of the tank, the lower heating element is the workhorse of the electric water heater. The upper heating element really only contributes when there is a high hot water demand and only serves to heat water in the upper portion of the tank. A constant supply of lukewarm water during a shower is indicative of a defective upper heating element. Short duration hot water supply during a shower is indicative of a defective lower heating element. Replacement heating elements must be of the same style and voltage/wattage rating as the ones presently in the water heater.

To test an electric water heater heating element proceed as follows:

  1. Use an electronic multimeter or multi-tester to test the heating elements in an electric water heater.Turn off power to the electric water heater at the main power panel. Do this by turning off the circuit breaker or fuse powering the heater.
  2. Wait for the water heater to cool, this is very important because the heating elements operate off a thermostat and hot water in the tank will affect electrical flow to the heating elements.
  3. Test for lukewarm to cool “hot” water by opening a hot water faucet and running the water until it is cool.
  4. Remove the access cover panel and insulation covering the heating element terminal block. Fold the insulation outward and away from the heater element.
  5. Loosen the screws holding the wires to each of the two terminal screws and remove the wires.
  6. Test for proper functioning of the heating element by checking for an open or closed circuit (continuity) using the electronic multi-tester. Set the multi-tester to “Ohms” and connect the red lead to one terminal and the black lead to the other terminal on the heating element.
  7. If the ohm reading is 0 on a digital multi-tester or if the needle reads infinity (does not move) using an analog dial, there is no flow of electricity through the element and it needs replacement.
  8. If you get an ohm resistance value using the multi-tester, then the heating element itself is not bad. The problem may be the other heating element or the upper or lower heating unit thermostat.

To remove the heating element proceed as follows:

  1. Shut-off the electric power to the water heater at the main power panel. Do this by turning off the circuit breaker or fuse powering the heater.
  2. Next, drain the electric water heater.
  3. Remove the access cover panel and insulation covering the heating element terminal block. Fold the insulation outward and away from the heater element.
  4. Remove the thermostat cover from the thermostat if necessary. Make sure to disengage the attachment point from the thermostat.
  5. Loosen the screws holding the wires to each of the two terminal screws and remove the wires.
  6. Remove a screw-in type heating element by turning the element counterclockwise with a 1-1/2 inch socket element removal wrench. Remove the existing gasket.
  7. Remove a flange type heating element by removing the four screws holding the element in place. Remove the existing gasket.

To replace the heating element proceed as follows:

  • Clean the area surrounding where the gasket fastens to the tank. It is good practice to remove and sediment at the bottom of the tank if you are replacing the bottom heating element.
  • Make sure the replacement element has the correct voltage and wattage rating. You can find this information on the flange or terminal block of the element or on the water heater’s data plate.
  • Properly place the new gasket onto the heating element and insert the assembly into the water heater tank. Tighten a screw-in type heating element by turning clockwise with the element socket wrench until secure.
  • Close the drain valve on the water heater.
  • Open the nearest hot water faucet to allow the tank to fill completely with water.
  • Keep the hot water faucet open for 3 minutes after obtaining a constant flow of water. This will purge the lines of any excess air and sediment.
  • Check for leaks around the element.
  • Connect the power wires to the electric heating element and make sure they are tight.
  • Replace the thermostat cover.
  • Replace the access cover panel.
  • Completely fill the water heater tank with water. This is critical because running electricity to heater elements that are not immersed in water will destroy the heating element.
  • Turn power to the water heater back on at the main power panel. Do this by turning on the circuit breaker or fuse powering the heater.

Read entire article HERE


Preventing Plumbing Disasters

7 Tips to Preventing Possible Plumbing Disasters at Home

Posted By: straightlinepr

Sinnamon Park, QLD, March 31, 2011 - In order to prevent or reduce the likelihood of a plumbing disaster, Paul Wright, head of the Brisbane Plumber, offers the residents of Brisbane the following plumbing disaster mitigation tips:

* The first step to avoiding plumbing emergencies is to periodically check your plumbing system, namely your sink, bathtub, shower, or other water sources for leaks. Regular checking of your plumbing system is important because it will let you discover breaches of the system that if not attended to could lead to serious problems later on. This does not only save you money that you’d be spending on major repairs later on, but it also saves you money in lowering your water bill, and of course the inconvenience of not having your regular water supply. You don’t necessarily have to check your system every day, once or twice a month will do it just fine.

* Secondly, you need to pay close attention to the kitchen sinks, bathtubs, and showers. These are potential hotspots. In other words, they experience more wear and tear than other rarely used water systems in the home. However, it doesn’t mean that you shouldn’t periodically check those areas that you don’t use regularly.

* Thirdly, make sure your drains aren’t clogged. To avoid clogged drains, you have to know the likely causes. Therefore, I advise you try avoiding hair, grease, or other debris from going into the drain. Hair or threads usually get stuck in the pipes thus prevent water from freely flowing through. Grease does the same thing. To prevent hair from getting into your drainage system, installing a drain screen is a good idea. Although most drains have a built in system that cuts and grinds leftover food, you should still try to avoid food debris getting into the drain.

* Fourthly, you need to check for leaks by closely observing the areas where the pipes are installed or joined. For instance, if you can see moisture on your wall, even though the weather is dry, or if you can find water slowly dripping from the ceiling of your basement, it is a possible sign there’s a leak somewhere in your pipe system. This would need your immediate attention if you are to ward off more serious damage later on.

Now, what if after you have carried out your preventative measures, you still find yourself facing an emergency with your plumbing system? "The first thing to do is to find the right solution to your problem. If you have knowledge about fixing taps or pipes, you should try to repair the damage yourself first before calling a plumber," owner Paul Wright, who recommends you consider the following additional steps to preventing a major plumbing disasters:

* Determine the kind of damage you have. A professional plumber usually offer different services and you have to know the kind of help that you need. Examples of common plumbing emergencies are clogged drains and toilets, blocked gutters, leaks, storm water issues, and so on. Knowing the kind of service that you need makes it easier for you to find the right plumbing professional.

* If water is continuously coming out of the pipe or faucet, try to do something about it immediately, such as preventing the continuous flow of water by turning off the main water switch because you might get a Brisbane Plumber immediately. You might have to wait a few hours before a plumber gets to you.

* Finally, it is always important to have a list of plumbers you can readily call upon even before you need their services. But if you fail to do your research, you can just browse through the yellow pages of your phone directory or ask your friends or neighbors if they know a reputable plumber.

"The above are some important things, tips, information, and considerations that you need to know about your Brisbane-based plumber that will help you in the future in case you have an emergency with your water system. Besides, you don’t need to wait for an emergency to happen before you start learning about how to take care of minor plumbing issues," said Paul Wright

For further information, please contact: Best Brisbane Plumber, 97 Sinnamon Road, Sinnamon Park QLD 4073 Australia, (07) 3376 5834, E-mail Address: , Website Address:

Paul Wright
Owner/Professional Plumber
Best Brisbane Plumber
97 Sinnamon Road
Sinnamon Park, QLD 4073
(07) 3376 5834

About the Author: For further information, please contact: Best Brisbane Plumber, 97 Sinnamon Road, Sinnamon Park QLD 4073 Australia, (07) 3376 5834, E-mail Address: , Website Address:

Article Source:


DIY Plumbing Projects Made Easy

When it comes to home repairs, there are a lot of tasks which can be done by a home owner without professional help. Minor repairs such as dripping faucets, water leaks and valve replacement can be easily carried out through DIY plumbing with a certain degree of patience, time and knowledge. In order to ensure that you carry out DIY plumbing safely and easily the following sections lists a set of instructions dealing with the basics of undertaking plumbing projects by yourself:

1. Start with minor fix jobs – the right way to guarantee safety as well as productive results thru DIY plumbing is to begin with minor fix and replacement jobs such as fixing leaks, removing clogs and replacing valves. With some practice and time you can pick up harder repairs round the house.

2. Collect required info – Before starting with DIY plumbing get the mandatory info with regard to an explicit project by looking up helpful info online or asking a pro for help.

3. Identify the level of work – it’s also critical to leave major repairs to a pro such as replacing water pipes which shouldn’t be undertaken unless you have sufficient information and experience.

4. Invest in a top-notch toolchest – making an investment in a high quality tool-kit is essential which ought to include different sizes of nuts, bolts, screws, drivers and hammers as well as a good torchlight as you’d be working in dimly lit areas while undertaking DIY plumbing projects.

5. Check the pipeline system – Checking plumbing system of your house e. G the positioning of the cold and warm water systems as well as complete water pipeline is highly important to see as well as carry out DIY plumbing jobs efficiently.

6. Select an appropriate time – As any DIY plumbing work will require that main water supply to be shut off you must select a time that’s acceptable to the members of your family so as to undertake any repairs efficiently.

by AngelaRobbins in Home & Family